DOI:
https://doi.org/10.64539/sjer.v1i2.2025.26Keywords:
Plastic Waste Recycling, Bitumen Modification, Nano-materials, Hot Mix Asphalt, Mechanical and Rheological PropertiesAbstract
In the modern era, pollution from plastic waste has become a growing concern, particularly due to the widespread use of plastics like plastic bottles. This research explores a novel approach for recycling plastic waste by incorporating plastic bottles into bitumen for the enhancement of Hot Mix Asphalt (HMA). Alongside this, nano-materials such as carbon nanotubes (CNTs), graphene, nanosilica, and nanoclays were used to further improve the mechanical, rheological, and durability properties of the modified bitumen. The plastic waste, in the form of plastic bottles, was added in varying proportions (3%, 5%, 8%, 10%, and 12% by weight of total mix) to investigate its effect on bitumen’s performance. The study conducted a series of tests, including Dynamic Shear Rheometer (DSR), Rotational Viscosity, Penetration Test, Softening Point Test, and Scanning Electron Microscopy (SEM), to evaluate the rheological and mechanical properties. The results revealed that the incorporation of plastic waste significantly improved the bitumen’s resistance to rutting, cracking, and fatigue, while nano-additives further enhanced high-temperature stability and elastic recovery. As the percentage of plastic waste in the bitumen increased, improvements in resistance to aging and moisture susceptibility were observed. Additionally, the plastic-modified bitumen exhibited better stability, improved resilience to temperature fluctuations, and enhanced mechanical strength. These findings suggest that combining plastic waste and nano-materials in bitumen can contribute to more sustainable road infrastructure, reducing plastic pollution while improving the performance and longevity of asphalt pavements.
References
[1] S. Hossain, “Singapore Role in Advancing Global Low-Carbon Economy: A Joint Effort for Sustainability and Climate Commitments,” American Journal of Business Science Philosophy (AJBSP), vol. 2, no. 1, pp. 36–47, Mar. 2025, doi: 10.70122/ajbsp.v2i1.25.
[2] Y. Ma et al., “A sustainable strategy for cleaner production of recyclable tung oil based and degradable cross-linked network composites to reduce plastic pollution,” J Clean Prod, vol. 507, May 2025, doi: 10.1016/j.jclepro.2025.145507.
[3] N. Isobe, S. Ishii, and H. Nomaki, “Progress and prospects in polymer science addressing plastic pollution in marine environments, including the deep-sea floor,” Mar. 01, 2025, Elsevier Ltd. doi: 10.1016/j.coche.2024.101089.
[4] J. Guan et al., “Pollution characteristics and control strategies of typical waste plastic recycling plants,” J Environ Chem Eng, vol. 13, no. 3, Jun. 2025, doi: 10.1016/j.jece.2025.116398.
[5] R. Cherian, C. J. Binish, and A. V. Vijayasankar, “Eco-frameworks for a cleaner planet: Harnessing next-gen MOFs for pollution and plastic waste remediation,” Aug. 01, 2025, Elsevier Ltd. doi: 10.1016/j.polymdegradstab.2025.111349.
[6] M. Arabani, M. Sadeghnejad, J. Haghanipour, and M. H. Hassanjani, “The influence of rice bran oil and nano-calcium oxide into bitumen as sustainable modifiers,” Case Studies in Construction Materials, vol. 21, Dec. 2024, doi: 10.1016/j.cscm.2024.e03458.
[7] K. P. G. K. P. Guruge et al., “Assessment of marine debris and plastic pollution along the western coast of Sri Lanka,” Reg Stud Mar Sci, vol. 86, Sep. 2025, doi: 10.1016/j.rsma.2025.104176.
[8] A. Weir et al., “Renewable binders from waste biomass for road construction: A review on thermochemical conversion technologies and current developments,” Constr Build Mater, vol. 330, p. 127076, 2022, doi: https://doi.org/10.1016/j.conbuildmat.2022.127076.
[9] V. M. Ramdas, P. Mandree, M. Mgangira, S. Mukaratirwa, R. Lalloo, and S. Ramchuran, “Review of current and future bio-based stabilisation products (enzymatic and polymeric) for road construction materials,” Transportation Geotechnics, vol. 27, p. 100458, 2021, doi: https://doi.org/10.1016/j.trgeo.2020.100458.
[10] L. Lugeiyamu, M. Kunlin, E. S. K. Mensahn, and A. Faraz, “Utilization of waste polyethylene terephthalate (PET) as partial replacement of bitumen in stone mastic asphalt,” Constr Build Mater, vol. 309, p. 125176, 2021, doi: https://doi.org/10.1016/j.conbuildmat.2021.125176.
[11] H. Li et al., “Recycling of waste polyethylene in asphalt and its performance enhancement methods: A critical literature review,” J Clean Prod, vol. 451, p. 142072, 2024, doi: https://doi.org/10.1016/j.jclepro.2024.142072.
[12] S. Rwahwire, I. Ssebagala, and V. Muwulya, “16 - Polyethylene terephthalate waste and lignin application in asphalt mixtures for road construction,” in Reuse of Plastic Waste in Eco-Efficient Concrete, F. Pacheco-Torgal, J. Khatib, F. Colangelo, and R. Tuladhar, Eds., Woodhead Publishing, 2024, pp. 387–406. doi: https://doi.org/10.1016/B978-0-443-13798-3.00007-3.
[13] S. Selim, M. R. Islam, N. M. Wasiuddin, and A. Peters, “A thermodynamic approach to investigate compatibility of HDPE, LDPE, and PP modified asphalt binders using differential scanning calorimeter (DSC),” Constr Build Mater, vol. 476, p. 140904, 2025, doi: https://doi.org/10.1016/j.conbuildmat.2025.140904.
[14] C. N. Andoh, P. Donkor, and J. Aboagye, “Ghana’s environmental law and waterbody protection: A critical assessment of plastic pollution regulations,” J Environ Manage, vol. 380, Apr. 2025, doi: 10.1016/j.jenvman.2025.125172.
[15] W. Wu, B. Chen, J. Chen, and Z. Li, “Study on the equivalence of extended-RTFOT and RTFOT-PAV in asphalt long-term aging simulation,” Constr Build Mater, vol. 476, p. 141239, 2025, doi: https://doi.org/10.1016/j.conbuildmat.2025.141239.
[16] X. Liu, T. Li, and H. Zhang, “Short-term aging resistance investigations of polymers and polyphosphoric acid modified asphalt binders under RTFOT aging process,” Constr Build Mater, vol. 191, pp. 787–794, 2018, doi: https://doi.org/10.1016/j.conbuildmat.2018.10.060.
[17] S. T. Olalekan et al., “Durability of bitumen binder reinforced with polymer additives: Towards upgrading Nigerian local bitumen,” Heliyon, vol. 10, no. 10, p. e30825, 2024, doi: https://doi.org/10.1016/j.heliyon.2024.e30825.
[18] S. T. Olalekan et al., “Durability of bitumen binder reinforced with polymer additives: Towards upgrading Nigerian local bitumen,” Heliyon, vol. 10, no. 10, p. e30825, 2024, doi: https://doi.org/10.1016/j.heliyon.2024.e30825.
[19] S. H. Mousavinezhad, G. H. Shafabakhsh, and O. Jafari Ani, “Nano-clay and styrene-butadiene-styrene modified bitumen for improvement of rutting performance in asphalt mixtures containing steel slag aggregates,” Constr Build Mater, vol. 226, pp. 793–801, Nov. 2019, doi: 10.1016/j.conbuildmat.2019.07.252.
[20] A. Qabur, H. Baaj, and M. El-Hakim, “Exploring the low-temperature performance of MPP-modified asphalt binders and mixtures using wet method,” Canadian Journal of Civil Engineering, vol. 51, no. 5, pp. 489–507, 2023, doi: https://doi.org/10.1139/cjce-2023-0306.
[21] H. Köse, O. N. Çelik, and D. Arslan, “A novel approach to warm mix asphalt additive production from polypropylene waste plastic via pyrolysis,” Constr Build Mater, vol. 411, p. 134151, 2024, doi: https://doi.org/10.1016/j.conbuildmat.2023.134151.
[22] J. Nisar, M. S. Mir, and Vivek, “Aging behavior characteristics of LDPE-SBS composite modified asphalt binder: A study of plasto-elastomeric composite,” Constr Build Mater, vol. 458, p. 139506, 2025, doi: https://doi.org/10.1016/j.conbuildmat.2024.139506.
[23] T. Alatas, M. Yilmaz, N. Kuloglu, M. Cakiroglu, and T. Geckil, “Investigation of shear complex modulus and phase angle values of short- and long-term aged polymer modified bitumens at different frequencies,” KSCE Journal of Civil Engineering, vol. 18, no. 7, pp. 2093–2099, 2014, doi: https://doi.org/10.1007/s12205-014-0287-7.
[24] S. Zhou, J. Yan, B. Shi, S. Li, C. Ai, and C. Yan, “Green synthesis of a broad-spectrum UV-blocking bitumen modifier: Investigation of anti-aging performance and mechanism in bitumen,” J Clean Prod, vol. 425, Nov. 2023, doi: 10.1016/j.jclepro.2023.139064.
[25] P. Ahmedzade, A. Fainleib, T. Günay, and O. Grygoryeva, “Modification of bitumen by electron beam irradiated recycled low density polyethylene,” Constr Build Mater, vol. 69, pp. 1–9, 2014, doi: https://doi.org/10.1016/j.conbuildmat.2014.07.027.
[26] S. T. Olalekan et al., “Synthesis of MWCNTs for successive polymeric and nano modification of a Nigerian bitumen, optimization using response surface methodology,” Nano-Structures and Nano-Objects, vol. 41, Feb. 2025, doi: 10.1016/j.nanoso.2025.101444.
[27] M. Sobrino-Monteliu, A. Navarro, B. Rodríguez, G. Tejera, A. Herrera, and A. Rodríguez, “Seabird biomonitoring indicates similar plastic pollution throughout the Canary Current,” Mar Pollut Bull, vol. 211, p. 117424, Feb. 2025, doi: 10.1016/j.marpolbul.2024.117424.
[28] G. Liu, H. Wang, W. Zheng, Y. Ma, Y. Huang, and M. Jia, “Characteristics and health risk assessment of monoaromatic hydrocarbons pollution in air above plastic runways,” Atmos Pollut Res, vol. 16, no. 9, Sep. 2025, doi: 10.1016/j.apr.2025.102588.
[29] Z. K. Holt, S. D. Khan, and D. F. Rodrigues, “Hyperspectral remote sensing as an environmental plastic pollution detection approach to determine occurrence of microplastics in diverse environments,” Environmental Pollution, vol. 377, Jul. 2025, doi: 10.1016/j.envpol.2025.126426.
[30] A. Max, V. Martín-Vélez, J. Navarro, A. Borrell, T. Montalvo, and O. Garcia-Garin, “Characterization of plastic ingestion in urban gull chicks and its implications for their use as pollution sentinels in coastal cities,” Mar Pollut Bull, vol. 211, Feb. 2025, doi: 10.1016/j.marpolbul.2024.117409.
[31] W. Zeiada, G. Al-Khateeb, E. Y. Hajj, and H. Ezzat, “Rheological properties of plastic-modified asphalt binders using diverse plastic wastes for enhanced pavement performance in the UAE,” Constr Build Mater, vol. 452, p. 138922, 2024, doi: https://doi.org/10.1016/j.conbuildmat.2024.138922.
[32] L. You et al., “Review of recycling waste plastics in asphalt paving materials,” Journal of Traffic and Transportation Engineering (English Edition), vol. 9, no. 5, pp. 742–764, 2022, doi: https://doi.org/10.1016/j.jtte.2022.07.002.
[33] P. Brohomo, A. Shakik, and M. H. Mizan, “Waste plastic utilization in asphalt mix for sustainability and enhancing rheological parameters,” Transp Res Interdiscip Perspect, vol. 31, p. 101456, 2025, doi: https://doi.org/10.1016/j.trip.2025.101456.
[34] K. Andrews, S. Dernayka, M. Amin Mir, and M. Ali Khasawneh, “Review of the utilization of plastic waste in asphalt pavements in hot climate conditions – KSA as a case study,” Mater Today Proc, 2023, doi: https://doi.org/10.1016/j.matpr.2023.05.463.
[35] I. Mutmainna, P. L. Gareso, S. Suryani, and D. Tahir, “Can agriculture and food waste be a solution to reduce environmental impact of plastic pollution? zero-waste approach for sustainable clean environment,” Mar. 01, 2025, Elsevier Ltd. doi: 10.1016/j.biortech.2025.132130.
[36] S. Heydari, A. Hajimohammadi, N. Haji Seyed Javadi, and N. Khalili, “The use of plastic waste in asphalt: A critical review on asphalt mix design and Marshall properties,” Constr Build Mater, vol. 309, p. 125185, 2021, doi: https://doi.org/10.1016/j.conbuildmat.2021.125185.
[37] L. Shu, X.-X. Lv, Y. Liu, D.-J. Wang, D.-F. Kong, and X. Chen, “Nano-confined catalysis with metal oxide particles encapsulated CNT for enhanced electro-fenton degradation of bisphenol A,” J Environ Chem Eng, vol. 13, no. 3, p. 117020, 2025, doi: https://doi.org/10.1016/j.jece.2025.117020.
[38] S. Baruah, J. Borah, K. Keerthi, P. A. Banu, P. Anitha, and S. Rajasekaran, “Investigation of hybrid electron extraction architecture via integration of mono-shelled carbon nanotubes (MS-CNT) with perovskite oxide BaSnO3 for beyond 38% efficiency in BaZrSe3 photovoltaic cells,” Opt Commun, vol. 583, p. 131769, 2025, doi: https://doi.org/10.1016/j.optcom.2025.131769.
[39] N. Mashaan, A. Chegenizadeh, and H. Nikraz, “A Comparison on Physical and Rheological Properties of Three Different Waste Plastic-Modified Bitumen,” Recycling, vol. 7, no. 2, p. 18, Mar. 2022, doi: 10.3390/recycling7020018.
[40] N. S. Mashaan and C. Dassanayake, “Rutting and Aging Properties of Recycled Polymer-Modified Pavement Materials,” Recycling, vol. 10, no. 2, p. 60, Apr. 2025, doi: 10.3390/recycling10020060.
[41] N. Mashaan, “Engineering Characterisation of Wearing Course Materials Modified with Waste Plastic,” Recycling, vol. 7, no. 4, p. 61, Aug. 2022, doi: 10.3390/recycling7040061.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Rafi Shahriar Alam, Md Omar Farkuq Maynul, Sazib Hossain
This work is licensed under a Creative Commons Attribution 4.0 International License.
