DOI:
https://doi.org/10.64539/sjer.v2i1.2026.435Keywords:
Embedded control, Industrial dehumidification, Multi-evaporator systems, Automation, MicrocontrollerAbstract
Industrial dehumidification plays a pivotal role in spice processing industries, where precise moisture control directly influences product quality, shelf life, and processing efficiency. However, in many industrial facilities, these systems are operated manually or using basic on-off control methods. Such practices often result in unstable operating conditions, frequent compressor switching, increased energy consumption, and reduced equipment lifespan. This study addresses the lack of affordable, hardware-level automation for multi-evaporator systems by presenting the design and implementation of a dedicated embedded control architecture. The proposed objective was to develop a dual-microcontroller system where a primary controller manages real-time decision-making based on temperature and relative humidity, while a secondary controller is strictly dedicated to safety and time-delay protection. The system was implemented and tested in an industrial spice processing facility. Key findings demonstrate that the autonomous mode reduced outlet air temperature variation to ±1 – 2 oC and relative humidity fluctuation to ±4 – 5%, compared to significantly higher variations in manual operation. Furthermore, the system reduced operator interventions from 1-2 per shift to 0-1 and minimized compressor cycling frequency. Beyond operational efficiency, the stabilization of the drying environment directly contributes to the preservation of critical quality parameters, such as volatile oil retention and color uniformity, which are frequently compromised under manual control regimes. These results imply that low-cost embedded automation can significantly enhance operational stability and safety in agro-industrial processing without requiring expensive infrastructure upgrades.
References
[1] G. Thamkaew, I. Sjöholm, and F. G. Galindo, “A review of drying methods for improving the quality of dried herbs,” Crit. Rev. Food Sci. Nutr., vol. 61, no. 11, pp. 1763–1786, Jun. 2021, https://doi.org/10.1080/10408398.2020.1765309.
[2] M. Zhang, H. Chen, Arun. S. Mujumdar, J. Tang, S. Miao, and Y. Wang, “Recent developments in high-quality drying of vegetables, fruits, and aquatic products,” Crit. Rev. Food Sci. Nutr., vol. 57, no. 6, pp. 1239–1255, Apr. 2017, https://doi.org/10.1080/10408398.2014.979280.
[3] T. Kalamees, M. Korpi, J. Vinha, and J. Kurnitski, “The effects of ventilation systems and building fabric on the stability of indoor temperature and humidity in Finnish detached houses,” Build. Environ., vol. 44, no. 8, pp. 1643–1650, Aug. 2009, https://doi.org/10.1016/j.buildenv.2008.10.010.
[4] I. N. Ardita, I. G. A. B. Wirajati, I. D. M. Susila, and I. K. Suherman, “Drying Spices by Utilizing the Dehumidification Process and the Heat Condensor in the Refrigeration System,” 2024, pp. 49–56. https://doi.org/10.2991/978-94-6463-364-1_6.
[5] M. Hamza, O. Bafail, and H. Alidrisi, “HVAC Systems Evaluation and Selection for Sustainable Office Buildings: An Integrated MCDM Approach,” Buildings, vol. 13, no. 7, p. 1847, Jul. 2023, https://doi.org/10.3390/buildings13071847.
[6] C. Acar, I. Dincer, and A. Mujumdar, “A comprehensive review of recent advances in renewable-based drying technologies for a sustainable future,” Drying Technology, vol. 40, no. 6, pp. 1029–1050, May 2022, https://doi.org/10.1080/07373937.2020.1848858.
[7] T. Hong, D. Yan, S. D’Oca, and C. Chen, “Ten questions concerning occupant behavior in buildings: The big picture,” Build. Environ., vol. 114, pp. 518–530, Mar. 2017, https://doi.org/10.1016/j.buildenv.2016.12.006.
[8] J.-S. Ko, J.-H. Huh, and J.-C. Kim, “Improvement of Temperature Control Performance of Thermoelectric Dehumidifier Used Industry 4.0 by the SF-PI Controller,” Processes, vol. 7, no. 2, p. 98, Feb. 2019, https://doi.org/10.3390/pr7020098.
[9] K. Almutairi, K. Irshad, S. Algarni, A. Ali, and S. Islam, “Experimental investigation of dehumidification process regulated by the photothermoelectric system,” Water Science and Technology, vol. 84, no. 10–11, pp. 3211–3226, Nov. 2021, https://doi.org/10.2166/wst.2021.368.
[10] Z. Ma, P. Cooper, D. Daly, and L. Ledo, “Existing building retrofits: Methodology and state-of-the-art,” Energy Build., vol. 55, pp. 889–902, Dec. 2012, https://doi.org/10.1016/j.enbuild.2012.08.018.
[11] J.-M. Clairand, M. Briceno-Leon, G. Escriva-Escriva, and A. M. Pantaleo, “Review of Energy Efficiency Technologies in the Food Industry: Trends, Barriers, and Opportunities,” IEEE Access, vol. 8, pp. 48015–48029, 2020, https://doi.org/10.1109/ACCESS.2020.2979077.
[12] Dong-Seong Kim, “Reliability Evaluation Model Of Industrial Internet Of Things Systems,” Proceeding International Conference on Engineering, vol. 1, no. 1, pp. 22–24, Nov. 2020, https://doi.org/10.36728/icone.v1i1.1266.
[13] A. P. Rogers, F. Guo, and B. P. Rasmussen, “A review of fault detection and diagnosis methods for residential air conditioning systems,” Build. Environ., vol. 161, p. 106236, Aug. 2019, https://doi.org/10.1016/j.buildenv.2019.106236.
[14] M. Poyyamozhi, B. Murugesan, N. Rajamanickam, M. Shorfuzzaman, and Y. Aboelmagd, “IoT—A Promising Solution to Energy Management in Smart Buildings: A Systematic Review, Applications, Barriers, and Future Scope,” Buildings, vol. 14, no. 11, p. 3446, Oct. 2024, https://doi.org/10.3390/buildings14113446.
[15] I. Belovski, T. Mihalev, E. Koleva, and A. Mandadzhiev, “Arduino-Based Sensor System Prototype for Microclimate Monitoring of an Experimental Greenhouse,” Engineering Proceedings, vol. 104, no. 1, 2025, https://doi.org/10.3390/engproc2025104054.
[16] Ö. Deniz, “Control of a Heat Pump Compressor with Variable Frequency Device Driven by PID,” International Journal of Engineering and Innovative Research, vol. 6, no. 1, pp. 1–14, Feb. 2024, https://doi.org/10.47933/ijeir.1380664.
[17] A. Zaim, “Industrial Compressed Air System Optimization: Experimental Evaluation of Energy Efficiency and Sustainability Gains,” Processes, vol. 13, no. 11, p. 3590, Nov. 2025, https://doi.org/10.3390/pr13113590.
[18] L. I. Minchala, J. Peralta, P. Mata-Quevedo, and J. Rojas, “An Approach to Industrial Automation Based on Low-Cost Embedded Platforms and Open Software,” Applied Sciences, vol. 10, no. 14, p. 4696, Jul. 2020, https://doi.org/10.3390/app10144696.
[19] L. Xia et al., “Research Progress and Application Status of Evaporative Cooling Technology,” Energies (Basel)., vol. 19, no. 2, p. 570, Jan. 2026, https://doi.org/10.3390/en19020570.
[20] Q. Qi and S. Deng, “Multivariable control of indoor air temperature and humidity in a direct expansion (DX) air conditioning (A/C) system,” Build. Environ., vol. 44, no. 8, pp. 1659–1667, Aug. 2009, https://doi.org/10.1016/j.buildenv.2008.11.001.
[21] P. P. Aradwad, A. K. T V, P. K. Sahoo, and I. Mani, “Key issues and challenges in spice grinding,” Clean. Eng. Technol., vol. 5, p. 100347, Dec. 2021, https://doi.org/10.1016/j.clet.2021.100347.
[22] S. Ishaque, N. Ullah, Q. S. Ali, N. Ullah, S. Choi, and M.-H. Kim, “Non-Uniformities in Heat Exchangers: A Two-Decade Review of Causes, Effects, and Mitigation Strategies,” Energies (Basel)., vol. 18, no. 11, p. 2751, May 2025, https://doi.org/10.3390/en18112751.
[23] M. Kremer, K. Rewitz, and D. Müller, “Development of a control strategy for air handling units equipped with membrane-based enthalpy exchangers,” E3S Web of Conferences, vol. 672, p. 03029, Dec. 2025, https://doi.org/10.1051/e3sconf/202567203029.
[24] L. Spinelle, M. Gerboles, G. Kok, S. Persijn, and T. Sauerwald, “Review of Portable and Low-Cost Sensors for the Ambient Air Monitoring of Benzene and Other Volatile Organic Compounds,” Sensors, vol. 17, no. 7, p. 1520, Jun. 2017, https://doi.org/10.3390/s17071520.
[25] Z. J. Liu, “Multi Point Temperature Measurement System Based on DS18B20,” Adv. Mat. Res., vol. 756–759, pp. 556–559, 2013, https://doi.org/10.4028/www.scientific.net/AMR.756-759.556.
[26] A. Elyounsi and A. N. Kalashnikov, “Evaluating Suitability of a DS18B20 Temperature Sensor for Use in an Accurate Air Temperature Distribution Measurement Network,” in The 8th International Electronic Conference on Sensors and Applications, Basel Switzerland: MDPI, Nov. 2021, p. 56. https://doi.org/10.3390/ecsa-8-11277.
[27] Smitha T.K, Ravikiran B.A., Karthik P., and Mondal T.K., “Design and implementation of control of solid state relay switches using MSP 430 for instantaneous high current supply,” in 2015 International Conference on Green Computing and Internet of Things (ICGCIoT), IEEE, Oct. 2015, pp. 474–479. https://doi.org/10.1109/ICGCIoT.2015.7380511.
[28] Z. M. Ali, M. Ćalasan, F. Jurado, and S. H. E. Abdel Aleem, “Complexities of Power Quality and Harmonic-Induced Overheating in Modern Power Grids Studies: Challenges and Solutions,” IEEE Access, vol. 12, pp. 151554–151597, 2024, https://doi.org/10.1109/ACCESS.2024.3477729.
[29] A. Dianov, “Optimization of Compressor Preheating to Increase Efficiency, Comfort, and Lifespan,” Technologies (Basel)., vol. 13, no. 12, p. 590, Dec. 2025, https://doi.org/10.3390/technologies13120590.
[30] A. Estrada, L. Córdova-Castillo, and S. Piedra, “Enhancing Vapor Compression Refrigeration Systems Efficiency via Two-Phase Length and Superheat Evaporator MIMO Control,” Processes, vol. 12, no. 8, p. 1600, Jul. 2024, https://doi.org/10.3390/pr12081600.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Pamodha Chathumal, Sanath Amaratunga
This work is licensed under a Creative Commons Attribution 4.0 International License.
