DOI:
https://doi.org/10.64539/msts.v2i1.2026.385Keywords:
EVA, MICA, Thermal Stability, Encapsulation, Thermogravimetric Analysis, NanocompositeAbstract
The long-term reliability and performance of photovoltaic (PV) modules largely depend on the thermal stability and durability of encapsulation materials that protect solar cells from environmental and thermal degradation. Ethylene–vinyl acetate (EVA) is widely used as a solar cell encapsulant due to its excellent optical and mechanical properties; however, its thermal stability and resistance to degradation remain critical challenges under prolonged operating conditions. Although EVA-based nanocomposites have been investigated for solar cell encapsulation, limited studies have systematically examined how different nanoclay fillers and processing conditions influence the thermal stability and encapsulation efficiency of EVA materials. This study aims to optimize the thermal stability of EVA nanocomposites by incorporating different inorganic fillers mica, montmorillonite (MMT), and vermiculite, at varying concentrations and milling cycles. An 8% EVA solution was prepared and blended with these fillers to evaluate their effects on the thermal and structural properties of the nanocomposite materials. Thermal characterization using Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA) revealed noticeable changes in melting temperature, glass transition temperature, and thermal degradation behavior. The incorporation of nanofillers improved the thermal stability of the EVA matrix and influenced its crystallinity and mechanical properties. The optimized EVA nanocomposite demonstrated enhanced thermal resistance and improved durability compared with neat EVA, although a slight reduction in encapsulation efficiency was observed. These findings provide valuable insights into the formulation and optimization of EVA nanocomposites for solar cell encapsulation, contributing to the development of more thermally stable and durable encapsulation materials for sustainable photovoltaic applications.
References
[1] N. Lakshmaiya and V. S. Murugan, “Bolstering EVA photovoltaic devices enclosing sheets with esterified cellulose nanofibers improves the mechanical and barrier characteristics,” in International Conference on Mathematical and Statistical Physics, Computational Science, Education and Communication (ICMSCE), vol. 12936, 2023. https://doi.org/10.1117/12.3011858.
[2] O. Alabi, T. Adeyi, and S. Ekun, “Analyzing Energy Performance and Assessing Dry Moisture Content of Briquettes through Numerical Investigations,” Eng. Technol. J., vol. 42, no. 1, pp. 1–10, 2024. https://doi.org/10.30684/etj.2023.143782.1608.
[3] A. Bala, B. M. Alao, A. O. Oyedun, O. O. Alabi, and M. Adamu, “Performance Evaluation of a Solar Photovoltaic (PV) Module at Different Solar Irradiance,” International Journal of Engineering and Applied Sciences, vol. 16, no. 2, pp. 63–75, 2024. http://dx.doi.org/10.24107/ijeas.1430556.
[4] O. O. Alabi, O. A. Adeaga, S. A. Ajagbe, T. S. Adekunle, and M. O. Adigun, “Performance of the Solar PV Module of the Dual Solar Axis Tracker of a Smart Home Monitoring System,” J. Hunan Univ. Natural Sci., vol. 50, no. 9, 2023. https://doi.org/10.55463/issn.1674-2974.50.9.3.
[5] G. Oreski et al., “Optical and thermal analysis of PVB encapsulant polymer functionalized with luminescent organic dyes,” in New Concepts in Solar and Thermal Radiation Conversion and Reliability, vol. 10759, p. 7, 2018. https://doi.org/10.1117/12.2318428.
[6] H. I. Elqady, S. Ookawara, A. H. El-Shazly, and M. F. Elkady, “Influence of encapsulation materials on the thermal performance of concentrator photovoltaic cells,” Case Stud. Therm. Eng., vol. 26, no. January, p. 101135, 2021. https://doi.org/10.1016/j.csite.2021.101135.
[7] K. Aitola et al., “Encapsulation of commercial and emerging solar cells with focus on perovskite solar cells,” Sol. Energy, vol. 237, no. April 2021, pp. 264–283, 2022. https://doi.org/10.1016/j.solener.2022.03.060.
[8] O. O. Alabi, O. J. Gbadeyan, A. Bala, G. O. Ogunsiji, and N. Deenadayalu, “Study of Combustion Characteristics of Diesel-Vegetable Oil Blends Utilizing an Industrial Fuel Burner,” Fuel Commun., vol. 18, no. October 2023, p. 100104, 2023. https://doi.org/10.1016/j.jfueco.2023.100104.
[9] O. O. Alabi, F. O. Ogunwoye, O. J. Gbadeyan, A. O. Fasina, and N. Deenadayalu, “Exploring the impact of diesel-vegetable oil blends as an alternative fuel in combustion chambers,” Biofuels, vol. 0, no. 0, pp. 1–8, 2024. https://doi.org/10.1080/17597269.2024.2386482.
[10] O. O. Alabi, O. A. Adeaga, and A. A. Dare, “Reviewing the Enhancement Optimum Performance Characteristics of Horizontal Axis Wind Turbine Blades Using Add - on of Suitable Aerodynamic Properties,” J. Ther. Eng., vol. 5, no. 1, pp. 93–99, 2024. https://doi.org/10.14744/thermal.0000848.
[11] A. Radwan et al., “Development of a new vacuum-based photovoltaic/thermal collector, and its thermal and exergy analyses,” Sustain. Energy Fuels, vol. 4, no. 12, pp. 6251–6273, 2020. https://doi.org/10.1039/d0se01102a.
[12] S. S. Akhtar, K. Raza, A. F. M. Arif, and K. S. Al-Athel, “Simulation Led Performance Evaluation and Design of Polymer Composite for Encapsulation of Low-Concentration Photovoltaic Modules,” J. Mater. Eng. Perform., vol. 30, no. 11, pp. 8242–8256, 2021. https://doi.org/10.1007/s11665-021-05999-4.
[13] R. Aradhya, M. Bilugali Mahadevaswamy, and Poornima, “Development and Characterization of Poly Ethylene-Co-Vinyl Acetate (PEVA) Hybrid Nanocomposite Encapsulates for Solar PV,” Emerg. Micro - Nanotechnologies, pp. 1–16, 2020. https://doi.org/10.5772/intechopen.88794.
[14] S. K. Gaddam, R. Pothu, and R. Boddula, “Advanced polymer encapsulates for photovoltaic devices − A review,” J. Mater., vol. 7, no. 5, pp. 920–928, 2021. https://doi.org/10.1016/j.jmat.2021.04.004.
[15] G. Griffini, S. Turri, “Polymeric materials for long‐term durability of photovoltaic systems.” Journal of Applied Polymer Science, vol. 133, no. 11, 2016. https://doi.org/10.1002/app.43080.
[16] J. Li et al., “Encapsulation of perovskite solar cells for enhanced stability: Structures, materials and characterization,” J. Power Sources, vol. 485, 2021. https://doi.org/10.1016/j.jpowsour.2020.229313.
[17] O. O. Alabi, T. A. Adeyi, G. O. Olagunju, O. A. Ogoh, and O. J. Gbadeyan, “Investigation and Exploring the Microstructural and Thermal Properties of Pseudostem Juice of Banana and Cassava Juice as a Quenching Media,” Waste and Biomass Valorization, vol. 16, pp. 1201–1213, 2025. https://doi.org/10.1007/s12649-024-02703-0.
[18] Z. Sahwee, S. Abdul Hamid, N. L. Mohd Kamal, and N. Norhashim, “Experimental evaluation of encapsulated solar cells for unmanned aerial vehicle application,” in Proc. 2019 IEEE Int. Conf. Aerosp. Electron. Remote Sens. Technol. ICARES 2019, pp. 1–4, 2019. https://doi.org/10.1109/ICARES.2019.8914549.
[19] L. Ocaña, C. Montes, S. González-Pérez, B. González-Díaz, and E. Llarena, “Characterization of a New Low Temperature Encapsulation Method with Ethylene-Vinyl Acetate under UV Irradiation for Perovskite Solar Cells,” Appl. Sci., vol. 12, no. 10, 2022. https://doi.org/10.3390/app12105228.
[20] M. C. C. de Oliveira, L. G. Soares, M. M. Viana, A. S. A. C. Diniz, and V. de F. C. Lins, “Development of ethylene-vinyl acetate copolymer/graphene oxide nanocomposites for crystalline silicon photovoltaic modules,” Int. J. Adhes. Adhes., vol. 100, no. May 2019, 2020. https://doi.org/10.1016/j.ijadhadh.2020.102595.
[21] M. Baiamonte, C. Colletti, A. Ragonesi, C. Gerardi, and N. T. Dintcheva, “Durability and Performance of Encapsulant Films for Bifacial Heterojunction Photovoltaic Modules,” Polymers (Basel)., vol. 14, no. 5, 2022. https://doi.org/10.3390/polym14051052.
[22] R. K. Raman, S. A. Gurusamy Thangavelu, S. Venkataraj, and A. Krishnamoorthy, “Materials, methods and strategies for encapsulation of perovskite solar cells: From past to present,” Renew. Sustain. Energy Rev., vol. 151, no. September 2020, p. 111608, 2021. https://doi.org/10.1016/j.rser.2021.111608.
[23] K. Yuwawech and J. Wootthikanokkhan, “EVA film reinforced with acid functionalized graphene nanoplatelets as a transparent barrier layer to enhance the durability of solar cells,” Int. J. Automot. Mech. Eng., vol. 16, no. 1, pp. 6301–6318, 2019. https://doi.org/10.15282/ijame.16.1.2019.15.0477.
[24] S. Prasad, M. J. Aljaafreh, M. S. Alsalhi, and A. Alshammari, “Encapsulated passivation of perovskite quantum dot (Cspbbr3) using a hot-melt adhesive (eva-tpr) for enhanced optical stability and efficiency,” Crystals, vol. 11, no. 4, 2021. https://doi.org/10.3390/cryst11040419.
[25] M. Baiamonte, S. Therias, J. L. Gardette, C. Colletti, and N. T. Dintcheva, “Encapsulant polymer blend films for bifacial heterojunction photovoltaic modules: Formulation, characterization and durability,” Polym. Degrad. Stab., vol. 193, 2021. https://doi.org/10.1016/j.polymdegradstab.2021.109716.
[26] S. Kumar, P. A. Bhatt, and R. N. Dasai, “Montmorillonite ( MMT )/ Ethylene Vinyl Acetate (EVA) Nanocomposite as an Encapsulant in Photovoltaic Cell ( PV ),” vol. 7, no. 7, July, 2020. https://www.irjet.net/archives/V7/i7/IRJET-V7I7384.pdf.
[27] M. Baiamonte, E. Morici, C. Colletti, and N. T. Dintcheva, “Polar Wax as Adhesion Promoter in Polymeric Blend Films for Durable Photovoltaic Encapsulants,” Materials (Basel)., vol. 15, no. 19, 2022. https://doi.org/10.3390/ma15196751.
[28] K. Raza, S. S. Akhtar, A. F. M. Arif, and A. S. Hakeem, “Computational design and development of high-performance polymer-composites as new encapsulant material for concentrated PV modules,” Sci. Rep., vol. 10, no. 1, pp. 1–14, 2020. https://doi.org/10.1038/s41598-020-62191-9.
[29] V. Sessini, M. P. Arrieta, J. M. Raquez, P. Dubois, J. M. Kenny, and L. Peponi, “Thermal and composting degradation of EVA/Thermoplastic starch blends and their nanocomposites,” Polym. Degrad. Stab., vol. 159, pp. 184–198, 2019. https://doi.org/10.1016/j.polymdegradstab.2018.11.025.
[30] N. T. Dintcheva, E. Morici, and C. Colletti, “Encapsulant Materials and Their Adoption in Photovoltaic Modules: A Brief Review,” Sustain., vol. 15, no. 12, pp. 1–13, 2023. https://doi.org/10.3390/su15129453.
[31] K. Yuwawech, J. Wootthikanokkhan, and S. Tanpichai, “Enhancement of thermal, mechanical and barrier properties of EVA solar cell encapsulating films by reinforcing with esterified cellulose nanofibres,” Polym. Test., vol. 48, pp. 12–22, 2015. https://doi.org/10.1016/j.polymertesting.2015.09.007.
